It can be challenging to connect led strips without soldering. However, there are several easy ways to do it. One way is by using a breadboard and jumper wires.
This will ensure that the connection remains strong while also allowing for easy removal if need be.
Another method is by using electrical tape or heat shrink tubing to secure the connections between each strip end and an extension cord of some sort.
In these blog posts, we will go through several methods on how to connect led strips without soldering so that by following these easy steps, you should have no problem connecting your LEDs without having to solder them!
Summary: Connecting LED strips without soldering can be achieved using alternative methods such as clip-on connectors, also known as solderless connectors. These connectors provide a simple and efficient way to join LED strips without requiring any soldering skills or tools. To get started, ensure you have compatible LED strip lights, connectors, and any necessary accessories like wire strippers or scissors.
Begin by preparing the LED strip ends for connection. If needed, cut the strips at the designated cut marks to achieve the desired length. Make sure the ends of the strips are clean and properly aligned. Select the appropriate solderless connector for your LED strips, such as strip-to-strip connectors, strip-to-wire connectors, or L-shaped connectors, depending on the desired configuration.
8 Benefits of Connecting Led Strips Without Soldering
1. Increased Flexibility: Power LED lighting kits are great for your home, office, or any projects you need to get done.
But running wires through the roof, walls or baseboards can be difficult and time-consuming (not to mention expensive).
The last thing you’d want is for the lights to stop working because the connection came loose. With LED strip lighting, you can connect multiple strips to create an assortment of different lengths and shapes.
2. Heat Dissipation: Compared with other lights like CFLs or incandescent bulbs, LEDs are cool to the touch. The far less heat they give off will help keep your rooms nice and cool (especially during warm summer months).
This is because LEDs are designed to transform the electric current into light, not heat.
3. Greater Durability: Heat is one of the primary killers of electrical circuits, which is why LED lights have far more excellent durability than other types of lighting.
Plus, because there are no filaments to burn out or break, they’re less likely to need replacing.
4. Easier Installation: LED strip lighting is very easy and quick to install. You don’t need any soldering or special tools; just plug and play!
Also, the peel-and-stick adhesive backing makes it a cinch to attach these flexible strips anywhere you want them, with no additional hardware required.
5. Less Expensive: LED strip lighting is less expensive to install and maintain, making it an excellent option for residential and commercial spaces.
You can cut each roll of LED lights at certain intervals to create the perfect length for your space!
6. No Need to Replace Frequently: That’s right, unlike incandescent light bulbs or CFLs, you won’t need to replace your LED strip lighting every few months when the bulbs burn out.
And with 50,000 hours of life expectancy (that’s almost six years without needing a replacement!), you’ll save even more in the long run
7. Environmentally Friendly: These days, it seems like everyone is concerned about green energy and saving our planet. LED lighting is one of the best ways to help conserve our planet’s limited resources.
Because LED lights convert energy into light more efficiently than other bulbs, they use far less power, emit fewer greenhouse gases, and contribute less to global warming.
8: Can Be Easily Cut: LED strip lighting can be cut to any length or shape, making it very versatile. You don’t need to bring the whole kit with you every time you’re working on a project.
Instead, remove the desired length of LED lights and keep the rest for another job.
Seven Ways on How to Connect Led Strips Without Soldering:
1. Connect them in Parallel
This is the easiest and cheapest way to connect strips and give you a wide range of color possibilities.
If all of your LEDs are wired in parallel, they’ll each receive the same amount of power, so one brighter LED won’t make the others dimmer.
However, if just one LED in the strip is connected differently than its neighbours, it can act as a weak spot in your circuit. So if one LED goes out, the rest will follow.
2. Using Breadboard and Jumper Wires
The breadboard and jumper wires allow you to make temporary connections. Ensure that when wiring them in parallel, use the same number of strips and avoid crossing any wires over each other.
3. Ribbon Cable or Wire Wrap Wire
The ribbon cable or wire wrap wire allows you to make a semi-permanent connection.
This connection method allows two LED strips to be connected together and is excellent for connecting the power source, switch, and LED controller in a tiny area.
Ribbon cable comes in different colors allowing you to color-code your connections.
4. Using an Extension Cord
The extension cord allows you to connect LED strips over a longer distance than any other method.
The wiring configuration is simple; ensure that when wiring them in parallel, use the same number of strips and avoid crossing any wires over each other.
5. Use Two Pin Connectors
The two-pin connectors can be used to connect LED strips that are already in use on your projects.
These connectors will work with most projects if you have a little bit of extra wire available. Be sure not to cross any wires over each other when wiring them up!
6. Use JST Connectors
The JST connectors are piggyback-style connectors that can also be used to connect LED strips.
These connectors are great for projects with a narrow area between each row of lights because the connector design keeps them separated. Be sure not to cross any wires over each other when wiring them up!
7. Using Gapless Jumper Connectors
The Gapless Jumper connectors allow you to make a semi-permanent connection. It can be used for LED strips that are already in use on your projects.
These connectors will work with most projects if you have a little bit of extra wire available.
Tips and Suggestions
1. Start your wiring by soldering the Power connection of the LED strips, then work on connecting them in parallel before you solder any points where they are connected.
2. Use only one color of wire when making connections between each strip or at least use a consistent color for all connections within a single system of strips.
3. Use tape or heat shrink tubing to group wires going in one direction before soldering or using any other permanent wiring method.
This will keep your wiring organized and help you avoid crossing wires over each other.
4. Make sure you plan out the length of wire for your connections so you don’t run out before completing your project.
5. Use electrical tape to protect your solder points and any loose wires, if necessary. This will help prevent accidental short circuits.
6. Use LED controllers that have additional connection options for different types of LED strip connectors.
Frequently Asked Questions
Can You Connect Led Strips With Tape?
Yes, you can connect LED strips with tape. This is a common way to connect LED strips together and make them work as one long strip. You will need to use some type of tape that is strong enough to hold the LEDs in place, but also flexible enough to be pulled back along the strip without breaking.
To connect the LEDs, start by cutting the tape into a long, thin strip. Make sure that the width of the strip is slightly wider than the width of the LED strips that you are connecting it to. Then, peel off one end of the tape and stick it to one edge of the LED strip. Now, slowly pull the other end of the tape towards you until it sticks to the other side of the LED strip. Now, carefully press down on both sides of the tape to hold it in place.
What Tape Can I Use to Hold Up Led Lights?
There are a number of different types of tape that can be used to hold up led lights, depending on the type of light and the desired effect. Some popular tapes include:
1. Command® Adhesive Tapes
2. 3M™ VHB Tape
3. 3M™ Scotchlite Tape
4. C3Tape™
5. Duck® Adhesive Tapes
Why Do My Led Strips Fall Off?
There are a few possible causes for LED strips falling off, including damage from water or moisture, improper installation, and incorrect wiring. Damage from water or moisture can occur when the LED strip is submerged in water or exposed to rain or snow. In some cases, this damage may not be immediately apparent, and the strip may still function normally. However, over time the water or moisture may cause the electrical connections to corrode and the strip to fall off. Improper installation can include using the wrong type of adhesive or not properly adhering the LED strip to the surface. Incorrect wiring can occur if the power supply is not compatible with the LED strip or if the wiring is not properly insulated. In all cases, it is important to consult with an experienced technician to diagnose and resolve any problems with LED strips.
Do Leds Use a Lot of Electricity
LED strip lights do not typically affect an electric bill, as they use a fraction of the energy of traditional light bulbs. In fact, LED strip lights can actually save an individual up to 80% on their electricity costs over the lifespan of the lightstrip.
LED strip lights are made up of many small LEDs, which are individually controlled by a controller chip. This allows the light to be adjusted in different directions and patterns, making it perfect for applications such as ceiling fans, cabinets, or wall sconces. In addition to being versatile and efficient, LED strip lights are also beautiful and stylish, making them a popular choice for any room in the home.
Conclusion
If you’re looking for a quick and easy way to connect LED strips that don’t require soldering, look no further! We recommend the use of male-to-male jumper wires.
The connectors are small enough to be hidden in your project’s housing or wiring channels while providing a reliable connection with high current ratings.
With the tips in this blog post, you should have a good idea of how to connect led strips without soldering.
However, if for some reason, none of these ideas works out or if there are any other questions about connecting LED Strips with wire strippers and electrical tape, please feel free to reach out!